2008 Ford Fusion 6 cylinder
Summary:
Detroit is up to their old tricks again!!
Faults:
The coils are burning up.
General Comments:
I had to replace the number 4 coil, because the Fusion had a serious miss on that cylinder. After this didn't correct the problem, I took it to the dealer that I bought the car from. The dealer found that all the coils are burning up. He said Ford has instruction out on this problem. They say to replace the 6 coils, 6 spark plugs, and the computer. $1,500. I feel that only a few chosen ones are informed of this common problem.
I really thought that Detroit had learned their lesson over the years, so I thought I would start driving American cars again. Now I have to listen to my wife tell me she told me so, and I should have stayed with Toyota.
Would you buy another car from this manufacturer? No
Review Date: 11th February, 2012
13th Feb 2012, 08:45
After researching it, this seems to be a common issue with the V6 engine. That is a very expensive fix now that you are out of warranty. Definitely don't use the dealer though. After your warranty expires, it is time to find a local shop that you can trust to do the right thing. Referrals are a good bet if you don't know anyone.
14th Feb 2012, 20:14
By all means avoid the dealer for such expensive items. You can generally save roughly 85% by doing this work yourself, and it isn't that hard to do. A non-dealer shop will save you from 50% to 70% in most cases. My dealer charges $1016 for a tune-up on the Mustang V-8. I can do it myself for around $80.
As for the V-6 Fusion, I can't fathom why on Earth anyone would buy one anyway. The awesome I-4 is incredibly fast and gets way better MPG. I'm delighted that Ford is dropping the silly (and useless) V-6 in 2013.
15th Feb 2012, 22:30
"My dealer charges $1016 for a tune-up on the Mustang V-8."
That's insane!!!
18th Feb 2012, 11:05
One of my friends was quoted a price of $1600 to change out the clutch slave cylinder on his Ford Ranger by the dealer. This is a 15-minute job. An independent shop did it for only $120. Avoid dealers at all cost!!!
20th Apr 2019, 03:53
Must be nice. I had a 2001 Ford F-150 (six cylinder, 5 speed) that needed a new slave cylinder. Way back in the day the slave cylinder was located on the engine firewall, which made for easy replacement should it fail. On my truck it was located inside the transmission, which meant separating the engine from the transmission.
I rode the bus for a few months when mine failed. Then rode a bicycle when I was tired of the sh**ty public transportation in Houston, TX. I took it to a shop (not Ford) to get it replaced and six months later I was back on a bicycle.
Such utter crap.
12th Feb 2012, 22:57
Avoid visiting the dealer unless there's no other option... They charge the highest rates for parts and labour.