3rd Dec 2017, 04:53
Do you have a 12-Volt test light?
If so, connect one end to the negative side of the ignition coil.
Connect the other end to the positive side of the coil.
Crank the engine.
Does the light blink or flash on and off?
If so, the pickup coil in the distributor is working, as is the ignition module. The problem is likely the coil.
If not, the pickup coil in the distributor or ignition is likely the problem.
Hope this gets you started.
2nd Dec 2017, 22:29
If you used ether and it didn’t fire, it's an electrical issue.